|
|
PDF CPC1965Y Data sheet ( Hoja de datos )
| Número de pieza | CPC1965Y | |
| Descripción | AC Solid State Relay | |
| Fabricantes | IXYS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CPC1965Y (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On State Voltage Drop
Rating
260
1
1.6
Units
Vrms
Arms
Vrms (at IL = 1Arms)
Features
• Load Current up to 1Arms
• 600VP Blocking Voltage
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• Machine Insertable, Wave Solderable
• Flammability Classification Rating of V-0
Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large Relays
• Solenoids
• Motors
• Heaters
CPC1965Y
AC Solid State Relay
Description
The CPC1965Y is an AC Solid State Relay (SSR)
using patented waveguide coupling with dual power
SCR outputs to produce an alternative to optocoupler
and Triac circuits. The switches are robust enough to
provide a blocking voltage of up to 600VP . In addition,
tightly controlled zero-cross circuitry ensures switching
of AC loads without the generation of transients.
The input and output circuits are optically coupled
to provide 3750Vrms of isolation and noise immunity
between control and load circuits. As a result, the
CPC1965Y is well suited for industrial environments
where electromagnetic interference could disrupt the
operation of electromechanical relays.
Approvals
• UL Recognized Component: File E69938
• CSA Certified Component: File 043639
Ordering Information
Part #
CPC1965Y
Description
4-Pin (8-Pin Body) SIP (25/Tube)
Pin Configuration
ZC
12
– LED + LED
68
AC Load AC Load
DS-CPC1965Y-R07
www.ixysic.com
1
1 page  
INTEGRATED CIRCUITS DIVISION
CPC1965Y
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
CPC1965Y
Moisture Sensitivity Level (MSL) Rating
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
CPC1965Y
Maximum Temperature x Time
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R07 www.ixysic.com
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet CPC1965Y.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CPC1965G | AC Solid State Relay |  Clare Inc. |
| CPC1965G | AC Solid State Relay | IXYS |
| CPC1965Y | AC Solid State Relay | Clare Inc. |
| CPC1965Y | AC Solid State Relay | IXYS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |