|
|
Número de pieza | ESDARF01-1BM2 | |
Descripción | ESD protection | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ESDARF01-1BM2 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! ESDARF01-1BM2
ESD protection for AM and FM antenna
Features
■ Single line bidirectional protection
■ Very low capacitance (3 pF typical)
■ Lead-free package
■ Very low capacitance, line to ground, for
optimized data integrity
■ Low PCB space consumption: 0.6 mm2 max
■ No insertion loss in AM and FM band
■ High reliability offered by monolithic integration
Complies with the following standards
■ IEC 61000-4-2:
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ MIL STD 883G- Method 3015-7: class 3B:
Applications
Where transient over voltage protection in ESD
sensitive equipment is required, such as:
■ Portable audio systems
■ Communication systems
■ Cellular phone handsets and accessories
■ Audio and video equipment
Description
The ESDARF01-1BM2 is a monolithic application
specific device dedicated to ESD protection of the
AM and FM antenna in cell phones and portable
equipment.
The device is ideal for applications where both
reduced printed circuit board space and power
absorption capability are required.
Datasheet − production data
2
1
SOD-882
Figure 1. Functional diagram
1
2
June 2012
This is information on a product in full production.
Doc ID 13462 Rev 3
1/11
www.st.com
11
1 page ESDARF01-1BM2
3 Ordering information scheme
Ordering information scheme
Figure 9. Ordering information scheme
ESD protection device
ESDA RF 01 - 1B M2
Application
RF Antenna
Number of lines
Directional
B = Bidirectional
Package
M2 = SOD-882
Doc ID 13462 Rev 3
5/11
5 Page ESDARF01-1BM2
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 13462 Rev 3
11/11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet ESDARF01-1BM2.PDF ] |
Número de pieza | Descripción | Fabricantes |
ESDARF01-1BM2 | ESD protection | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |