|
|
Número de pieza | CM1693-04DE | |
Descripción | L-C LCD and Camera EMI Filter Array | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CM1693-04DE (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! CM1693-04DE,
CM1693-06DE,
CM1693-08DE
L-C LCD and Camera EMI
Filter Array with ESD
Protection
Product Description
The CM1693 is a family of pi−style EMI filter arrays with ESD
protection, which integrates four, six or eight filters (C−L−C) into
a small−form factor, uDFN 0.40 mm pitch package. Each EMI filter
channel is implemented as a 3−pole L−C filter, where the component
values are 10 pF−26 nH−12 pF. The CM1693’s roll−off frequency at
−6 dB attenuation is 300 MHz and can be used in applications where
the data rates are as high as 140 Mbps. The CM1693 also provides
greater than −30 dB attenuation over the 800 MHz to 6 GHz frequency
range. The device includes ESD diodes on every pin that provide
a very high level of protection for sensitive electronic components
against possible electrostatic discharge (ESD). The ESD protection
diodes connected to the filter ports are designed and characterized to
safely dissipate ESD strikes of ±18 kV, which is beyond the maximum
requirement of the IEC61000−4−2 international standard.
This device is particularly well suited for wireless handsets, mobile
LCD modules and PDAs because of its small package format and
easy−to−use pin assignments. In particular, the CM1693 is ideal for
EMI filtering and protecting data and control lines for the LCD display
and camera interface in mobile handsets.
The CM1693 is housed in space saving, low profile, 0.40 mm pitch
uDFN packages in a RoHS compliant, Pb−Free format.
Features
• 4, 6 or 8 Channels of EMI Filtering with Integrated ESD Protection
• Pi−Style EMI Filters in a Capacitor−Inductor−Capacitor (C−L−C)
Network
http://onsemi.com
8
1
uDFN8
DE SUFFIX
CASE 517BC
12
1
uDFN12
DE SUFFIX
CASE 517BD
16
1
uDFN16
DE SUFFIX
CASE 517BE
Filter +
ESDn*
ELECTRICAL SCHEMATIC
26 nH
10 pF 12 pF
Filter +
ESDn*
GND
1 of 4, 6 or 8 EMI/RFI Filter Channels
with Integrated ESD protection
* See Package/Pinout Diagram for expanded pin information
MARKING DIAGRAM
P93 MG
G
P936 MG
G
P938 MG
G
1
11
XXXX = Specific Device Code
M = Month Code
G = Pb−Free Package
(*Note: Microdot may be in either location)
• +18 kV ESD Protection on Each Channel
(IEC 61000−4−2 Level 4, Contact Discharge)
• Greater than −35 dB Attenuation (Typical) at 1GHz
• uDFN Lead−Free Package with 0.40 mm Lead Pitch:
♦ 4−Ch. = 8−Lead uDFN
♦ 6−Ch. = 12−Lead uDFN
♦ 8−Ch. = 16−Lead uDFN
• uDFN Package size:
♦ 8−Lead: 1.70 mm x 1.35 mm
♦ 12−Lead: 2.50 mm x 1.35 mm
♦ 16−Lead: 3.30 mm x 1.35 mm
• Increased Robustness Against Vertical Impacts During
Manufacturing Process
ORDERING INFORMATION
Device
CM1693−04DE
CM1693−06DE
CM1693−08DE
Package
Shipping†
uDFN−8 3000/Tape & Reel
(Pb−Free)
uDFN−12 3000/Tape & Reel
(Pb−Free)
uDFN−16 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
• These Devices are Pb−Free and are RoHS Compliant
Applications
• LCD and Camera Data Lines in Mobile Handsets
• I/O Port Protection for Mobile Handsets, Notebook
Computers, PDAs etc.
• Handheld PCs/PDAs
• LCD and Camera Modules
• EMI Filtering for Data Ports in Cell Phones, PDAs
or Notebook Computers.
• Wireless Handsets
© Semiconductor Components Industries, LLC, 2013
May, 2013 − Rev. 3
1
Publication Order Number:
CM1693/D
1 page CM1693−04DE, CM1693−06DE, CM1693−08DE
MECHANICAL DETAILS
uDFN−08, uDFN−12 and uDFN−16 Mechanical Specifications, 0.4mm
The 8−lead, 12−lead and 16−lead, 0.4 mm pitch uDFN package dimensions are presented below.
Table 5. TAPE AND REEL SPECIFICATIONS
Part Number
Pocket Size (mm) Tape Width†
Reel
Qty per
Package Size (mm)
B0 x A0 x K0
W
Diameter
Reel
P0 P1
CM1693−04DE
1.70 x 1.35 x 0.50
1.95 x 1.60 x 0.60
8 mm
178 mm (7″)
3000
4 mm 4 mm
CM1693−06DE
2.50 x 1.35 x 0.50
2.75 x 1.60 x 0.60
8 mm
178 mm (7″)
3000
4 mm 4 mm
CM1693−08DE
3.30 x 1.35 x 0.50
3.50 x 1.55 x 0.70
12 mm
178 mm (7″)
3000
4 mm 4 mm
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
P0
Top
Cover
Tape
ÎÎ ÎÎÎÎÎÎÎÎK0
ÎÎ ÎÎÎÎÎÎÎÎFor Tape Feeder Reference
Embossment
Only Including Draft
A0
B0
P1
Concentric Around B
User Direction of Feed
10 Pitches Cumulative
Tolerance On Tape
±0.2 mm
W
Center Lines
of Cavity
http://onsemi.com
5
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet CM1693-04DE.PDF ] |
Número de pieza | Descripción | Fabricantes |
CM1693-04DE | L-C LCD and Camera EMI Filter Array | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |