|
|
Número de pieza | AIC3415 | |
Descripción | 1.2MHz Synchronous Step-Up Converter | |
Fabricantes | Analog Intergrations Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AIC3415 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! AIC3415
700mA, 1.2MHz Synchronous Step-Up Converter
FEATURES
DESCRIPTION
VIN Start Up Voltage: 0.9V
Output Voltage Range: from 2.7V to 5.25V.
Up to 94% Efficiency
1.2MHz Fixed Frequency Switching
Built-in current mode compensation
Built-in Protection: Over Current, Over Voltage,
Over Temperature
Optional Automatic PWM/PSM Version (AIC3415)
and Forced PWM Version (AIC3415A).
Logic Controlled Shutdown: < 1μA
Output Disconnect by Shutdown Function
Built-in Soft Start
Active Anti-ringing Control
Small SOT-23-6 Package
APPLICATIONS
Single/Dual Cells Ni-Cd/Ni-Mh/Li-Lon Type Bat-
tery Operated Products
Wireless Mice
PDA
Digital Still Cameras
Portable Equipment
The AIC3415 is a synchronous step-up DC/DC con-
verter.
There are two options for AIC3415: automatic
PWM/PSM version (AIC3415), and forced PWM ver-
sion (AIC3415A). The automatic PWM/PSM version
enters PSM from PWM automatically when load de-
creases. The goal is to improve efficiency and reduce
quiescent current; the forced PWM version keeps the
same operating frequency even when it operates in
light load. This guarantees low output ripple and noise.
The AIC3415 provides a complete power supply solu-
tion for products powered by one or two Alkaline,
Ni-Cd, Ni-MH or Li-Lon battery cells. It stays in opera-
tion with supply voltages down to 0.5V. The imple-
mented boost converter uses an internal synchronous
rectifier to obtain maximum efficiency.
A low-EMI mode is implemented to reduce ringing and
in effect lower radiated electromagnetic energy when
the converter enters the discontinuous conduction
mode.
TYPICAL APPLICATION CIRCUITS
1.2V
VIN
CIN
4.7uF
L1
4.7uH
U1
6 VIN
SW
4 SHDN VOUT
2 GND
AIC3415
FB
1
5
R1
3 1M
R2
600K
3.3V
VOUT
COUT
4.7uF
Analog Integrations Corporation
Si-Soft Research Center
DS-3415G-02 20110923
3A1, No.1, Li-Hsin Rd. I, Science Park, Hsinchu 300, Taiwan, R.O.C.
TEL: 886-3-5772500
FAX: 886-3-5772510
www.analog.com.tw
1
1 page AIC3415
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
Fig. 7 Frequency vs. Supply Voltage
Fig.8 Minimum Start-up Voltage vs. Output current
Fig. 9 Output Voltage vs. Temperature
Fig. 10 Frequency vs. Temperature
Fig. 11 Feedback Voltage vs. Temperature
Fig. 12 Start-up Voltage Waveform
5
5 Page PHYSICAL DIMENSIONS
SOT-23-6
D
AIC3415
A Ae
e1
SEE VIEW B
WITH PLATING
b
BASE METAL
SECTION A-A
S SOT-23-6
Y
M MILLIMETERS
B
O
L
MIN.
MAX.
A 0.95
1.45
GAUGE PLANE
A1 0.00
0.15
SEATING PLANE
L
A2 0.90
1.30
L1
VIEW B
b 0.30
c 0.08
D 2.80
0.50
0.22
3.00
Note : 1. Refer to JEDEC MO-178AB.
2. Dimension "D" does not include mold flash, protrusions
or gate burrs. Mold flash, protrusion or gate burrs shall not
exceed 10 mil per side.
3. Dimension "E1" does not include inter-lead flash or protrusions.
4. Controlling dimension is millimeter, converted inch
dimensions are not necessarily exact.
Note:
E
E1
e
e1
L
L1
θ
2.60
1.50
0.30
0°
0.95 BSC
1.90 BSC
0.60 REF
3.00
1.70
0.60
8°
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any
circuitry other than circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third par-
ties that may result from its use. We reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices
or systems are devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and
whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury to the user.
11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet AIC3415.PDF ] |
Número de pieza | Descripción | Fabricantes |
AIC3412 | Low IQ High Light Load Efficiency Synchronous Boost Converter | Analog Intergrations Corporation |
AIC3413 | Step-Down Converter | Analog Intergrations Corporation |
AIC3414 | Synchronous Step-Up Converter | Analog Integrations |
AIC3415 | 1.2MHz Synchronous Step-Up Converter | Analog Intergrations Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |