Datasheet SRF02 Equivalent ( PDF ) - Data

SRF02 Ultrasonic range finder Technical Specification Overview The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop and no parity bits, and may be connected directly to the serial ports on any microcontroller. Up to 16 SRF02's may be co

SRF02 Ultra sonic range finder http:, , www.robot­electronics.co.uk, htm, srf02techI2C.htm SRF02 Ultr asonic r ange finder Technical Specification I2C Mode For Serial mode click here I2C Communication To use the SRF02 in I2C mode, make sure nothing is connected to the mode pin, it must be left unconnected. The I2C bus is available on popular controllers such as the OOPic, Stamp BS2p, Pic

Preliminary Data Sheet Product Description The Sirenza Microdevices’ SRF-1016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I, Q amplitude and phase balance. Use of this highly integ

Preliminary Data Sheet Product Description The Sirenza Microdevices’ SRF-1016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I, Q amplitude and phase balance. Use of this highly integ

Product Description The Sirenza Microdevices’ SRF-2016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I, Q amplitude and phase balance. Use of this highly integrated device can result

Product Description The Sirenza Microdevices’ SRF-2016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I, Q amplitude and phase balance. Use of this highly integrated device can result

SRF01 Ultrasonic range finder Technical Documentation Overview The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB. Connection is to a single pin Serial interface. The serial interface is a standard TTL level UART format of 1 start, 1 stop and no parity bits, and m

SRF02 Ultrasonic range finder Technical Specification Overview The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop and no parity bits,

SRF02 Ultra sonic range finder http:, , www.robot­electronics.co.uk, htm, srf02techI2C.htm SRF02 Ultr asonic r ange finder Technical Specification I2C Mode For Serial mode click here I2C Communication To use the SRF02 in I2C mode, make sure nothing is connected to the mode pin, it must be