DataSheet.es    



Datasheet SP3496E Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 SP3496E   (SP3495E - SP3497E) 3.3V High Speed RS-485/RS-422 Transceivers

SP3495E-3497E HIGH SPEED +3.3V RS-485/RS-422 TRANSCEIVERS WITH +/-15KV ESD PROTECTION AND ADVANCED FAILSAFE MAY 2009 REV. 1.0.0 GENERAL DESCRIPTION The SP3495E - SP3497E transceivers are suitable for high speed bidirectional communication on multipoint bus transmission lines. Th
Exar Corporation
Exar Corporation
datasheet SP3496E pdf

SP34 Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
SP3485

+3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate

® SP3481/SP3485 +3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate ■ ■ ■ ■ ■ ■ RS-485 and RS-422 Transceivers Operates from a single +3.3V supply Interoperable with +5.0V logic Driver/Receiver Enable Low Power Shutdown Mode (SP3481) -7V to +12V C
Sipex
Sipex
datasheet pdf - Sipex
SP34063A

1.5A Buck/Boost/Inverting DC-DC Switching Regulator

® Advanced SP34063A 1.5A Buck/Boost/Inverting DC-DC Switching Regulator FEATURES ■ Supply Voltage: 3V - 36V ■ Current Limiting ■ Output Switch Current to 1.5A ■ Adjustable Output Voltage ■ Operation frequency up to 110KHz ■ Low Quiescent Current ■ Precision 2% R
Sipex Corporation
Sipex Corporation
datasheet pdf - Sipex Corporation
SP3485

+3.3V Low Power Half-Duplex RS-485 Transceiver

SP3485 +3.3V Low Power Half-Duplex RS-485 Transceiver with 10Mbps Data Rate • RS-485 and RS-422 Transceiver • Operates from a single +3.3V Supply • Interoperable with +5.0V logic • Driver/Receiver Enable • -7V to +12V Common-Mode Input Voltage Range • Allows up to 32
Exar
Exar
datasheet pdf - Exar


Esta página es del resultado de búsqueda del SP3496E. Si pulsa el resultado de búsqueda de SP3496E se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap