Datasheet SN74LS377 Equivalent ( PDF ) - Data

SN74LS377 Octal D Flip-Flop with Enable The SN74LS377 is an 8-bit register built using advanced Low Power Schottky technology. This register consists of eight D-type flip-flops with a buffered common clock and a buffered common clock enable. http:, , onsemi.com 8-Bit High Speed Parallel Registers Positive Edge-Triggered D-Type Flip Flops Fully Buffered Common Clock and Enable Inputs True a

OCTAL D FLIP-FLOP WITH ENABLE; HEX D FLIP-FLOP WITH ENABLE; 4-BIT D FLIP-FLOP WITH ENABLE The SN54 , 74LS377 is an 8-bit register built using advanced Low Power Schottky technology. This register consists of eight D-type flip-flops with a buffered common clock and a buffered common clock enable. The SN54 , 74LS378 is a 6-Bit Register with a buffered common enable. This device is similar to the S

1. N channel 2. Enhancement mode 3. Logic Level

1. N channel Enhancement mode 2. Logic Level

1. N-Channel Enhancement mode Logic Level dv, dt rated 2. VDS 60 V RDS(on) 5 Ω ID 0.2 A

1. N-Channel Enhancement mode Logic Level dv, dt rated 2. VDS 60 V RDS(on) 5 Ω ID 0.23 A

The SN7101 is integrated a high stability band gap voltage reference, two ORed operational amplifiers and a current source. This IC compares the DC voltage and the current level at the output of a switching power supply to an internal reference.

It provides a feedback through an Opto-coupler to the PWM controller IC in the primary side. The controlled current generator can be used to modify the level of current limitation by offsetting the information coming from the current sensing resistor.

The SN7103 is a monolithic IC that includes one independent op-amp and another op-amp for which the non inverting input is wired to a 2.5V fixed Voltage Reference.