|
|
Datasheet SN74LS114A Equivalent ( PDF ) - Flip-flop |
| P/N | Descripción | Fabr. | BUY |
| SN74LS114A | Dual J-K Negative-Edge-Triggered Flip-Flops With Preset Common Clear And Commo |
 |
 |
| SN74LS114A | DUAL JK NEGATIVE EDGE-TRIGGERED FLIP-FLOP SN54, 74LS114A DUAL JK NEGATIVE EDGE-TRIGGERED FLIP-FLOP
The SN54, 74LS114A offers common clock and common clear inputs and individual J, K, and set inputs. These monolithic dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will be accepted. The logic level of the J and K inputs may be allowed to change when the clock pulse is HIGH and the bistable wil
|
 |
|
SN7 Datasheet ( Hoja de datos ) - Resultados que coinciden |
| P/N | Descripción | Fabr. | |
| SN7000 | 60V / SIPMOS Small-Signal Transistor
1. N channel 2. Enhancement mode 3. Logic Level
|  |
 |
| SN7002 | SIPMOS Small-Signal Transistor
1. N channel Enhancement mode 2. Logic Level
| |
|
| SN7002N | SIPMOS Small-Signal-Transistor
1. N-Channel Enhancement mode Logic Level dv, dt rated 2. VDS 60 V RDS(on) 5 Ω ID 0.2 A
|  |
|
| SN7002W | SIPMOS Small-Signal-Transistor
1. N-Channel Enhancement mode Logic Level dv, dt rated 2. VDS 60 V RDS(on) 5 Ω ID 0.23 A
| |
|
| SN7101 | Voltage and Current Controller
The SN7101 is integrated a high stability band gap voltage reference, two ORed operational amplifiers and a current source. This IC compares the DC voltage and the current level at the output of a switching power supply to an internal reference.
|  |
|
| SN7101P | Voltage and Current Controller
It provides a feedback through an Opto-coupler to the PWM controller IC in the primary side. The controlled current generator can be used to modify the level of current limitation by offsetting the information coming from the current sensing resistor.
| |
|
| SN7103 | Dual Operational Amplifier and Voltage Reference
The SN7103 is a monolithic IC that includes one independent op-amp and another op-amp for which the non inverting input is wired to a 2.5V fixed Voltage Reference.
| |
|
| Esta página es del resultado de búsqueda del SN74LS114A. Si pulsa el resultado de búsqueda de SN74LS114A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| P/N | Descripción | Fabr. | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |