|
|
Número de pieza | SMDJ130CA | |
Descripción | Surface Mount Transient Voltage Suppressors | |
Fabricantes | UN Semiconducctor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SMDJ130CA (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! Surface Mount Transient Voltage Suppressors (TVS)
SMDJ Series 5.0 To 440 V 3000W
Description
The SMDJ series is designed specifically to protect sensitive electronic
equipment from voltage transients induced by lightning and other transient
voltage events.
Features
u For surface mounted applications in order to optimize board space
u Low leakage
u Uni and Bidirectional unit
u Glass passivated junction
u Low inductance
u Excellent clamping capability
u 3000W Peak power capability at 10 × 1000µs waveform Repetition
rate (duty cycle):0.01%
u Fast response time: typically less than 1.0ps from 0 Volts to VBR min
u Typical IR less than 5μA above 12V.
u High Temperature soldering: 260°C/40 seconds at terminals
u Typical maximum temperature coefficient ΔVBR = 0.1% ×
VBR@25°C× ΔT
u Plastic package has Underwriters Laboratory Flammability 94V-0
u Matte tin lead–free Plated
u Halogen free and RoHS compliant
u Typical failure mode is short from over-specified voltage or current
u Whisker test is conducted based on JEDEC JESD201A per its table
4a and 4c
u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
u ESD protection of data lines in accordance with IEC 61000-4-2
(IEC801-2)
u EFT protection of data lines in accordance with IEC 61000-4-4
(IEC801-4)
Uni-directional
Bi-directional
Functional Diagram
Cathode
Bi-directional
Uni-direction
Anode
Applications
TVS devices are ideal for the protection of I/O interfaces, VCC
bus and other vulnerable circuits used in Telecom, Computer,
Industrial and Consumer electronic applications.
Maximum Ratings (TA=25℃ unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note
1), (Note 2)
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)
Power Dissipation on Infinite Heat Sink at TL=75°C
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only
(Note 4)
PPPM
IPP
PM(AV)
IFSM
VF
Operating junction and Storage Temperature Range.
TJ , TSTG
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
Value
3000
See Next Table
6.0
300
3.5/5.0
-55 to +150
Unit
Watts
Amps
Watt
Amps
Voltage
°C
UN Semiconductor Co., Ltd.
Revision October 18, 2013
1/7
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
1 page Surface Mount Transient Voltage Suppressors (TVS)
SMDJ Series 5.0 To 440 V 3000W
I-V Curve Characteristics
Physical Specifications
Weight
Case
Polarity
Terminal
0.007 ounce, 0.21 gram
JEDEC DO-214AB Molded Plastic over
glass passivated junction
Color band denotes cathode except
Bipolar
Matte Tin-plated leads, Solderable per
JESD22-B102D
Soldering Parameters
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25℃ to peak)
Critical Zone
TL to TP
Ramp-down
Time
Environmental Specifications
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
Thermal Shock
JESD22-A104
JESD22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Reflow Condition
Lead–free assembly
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max (Ts(max))
150°C
200°C
- Time (min to max) (ts)
60 -180 Seconds
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
Reflow
- Temperature (TL) (Liquidus)
- Time (min to max) (ts)
Peak Temperature (TP)
3°C/second max
217°C
60 -150 Seconds
260 +0/-5°C
Time within 5°C
Temperature (tp)
of
actual
peak
20 -40 Seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
Do not exceed
8 minutes Max
280°C
UN Semiconductor Co., Ltd.
Revision October 18, 2013
5/7
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet SMDJ130CA.PDF ] |
Número de pieza | Descripción | Fabricantes |
SMDJ130C | TVS Diode, SMD (Transient Voltage Suppressor) | PACELEADER |
SMDJ130C | Surface Mount Transient Voltage Suppressors | UN Semiconducctor |
SMDJ130CA | Transient Voltage Suppression Diodes | Littelfuse |
SMDJ130CA | SURFACE MOUNT | MDE |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |