|
|
Número de pieza | HMC1164 | |
Descripción | 10.38GHz to 11.30GHz MMIC VCO | |
Fabricantes | Analog Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC1164 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! Data Sheet
10.38 GHz to 11.30 GHz MMIC VCO with
Half Frequency Output
HMC1164
FEATURES
Dual output frequency range
fOUT = 10.38 GHz to 11.30 GHz
fOUT/2 = 5.19 GHz to 5.65 GHz
Power output (POUT): 8 dBm
Single-side band (SSB) phase noise
−86 dBc/Hz typical at 10 kHz
−114 dBc/Hz typical at 100 kHz
No external resonator needed
32-lead, RoHS compliant, 5 mm × 5 mm LFCSP (25 mm²)
APPLICATIONS
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
GENERAL DESCRIPTION
The HMC1164 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
FUNCTIONAL BLOCK DIAGRAM
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
Figure 1.
PACKAGE
BASE
GND
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
The power output is 8 dBm typical from a 5 V supply voltage.
The voltage controlled oscillator is housed in a RoHS-compliant
LFCSP package and requires no external matching components.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
HMC1164
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
HMC1164
TOP VIEW
(Not to Scale)
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
Table 3. Pin Function Descriptions
Pin No.
Mnemonic
1 to 4, 6 to 10, 13 to 18, NC
20, 22 to 28, 30 to 32
5, 11 GND
12 RFOUT/2
19 RFOUT
21 VCC
29 VTUNE
EP
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS MAY BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING
THE PERFORMANCE OF THE DEVICE.
2. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND.
Figure 2. Pin Configuration
Description
No Connect. However, these pins can be connected to RF/dc ground without affecting the
performance of the device.
Ground. Connect these pins to RF/dc ground.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive
source impedance.
Exposed Pad. The exposed metal pad must be connected to RF/dc ground.
Rev. 0 | Page 5 of 10
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet HMC1164.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC1160 | MMIC VCO | Analog Devices |
HMC1161 | 8.71 GHz to 9.55 GHz MMIC VCO | Analog Devices |
HMC1162 | 9.25GHz to 10.10GHz MMIC VCO | Analog Devices |
HMC1163 | 9.65 GHz to 10.41 GHz MMIC VCO | Analog Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |