|
|
Datasheet APXE4R0ARA681MH80G Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | APXE4R0ARA681MH80G | CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Surface Mount
PXENPCAPTM-
Series
・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte.
(ESR and rated ripple current values are improved from PXA series.)
・Rated voltage range : 2.5 to 16 | NIPPON CHEMI-CON | capacitor |
APX Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | APX1117 | 1A LOW DROPOUT POSITIVE ADJUSTABLE
APX1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR
Features
• • • • • • • • 1.3V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed 1. Diodes Incorporated data | | |
2 | APX1690 | 9-Set Over Voltage Protector
APX1690
9-Set Over Voltage Protector
Features
• 9-Set Voltage Monitors (4 Fixed Inputs for 7.0V, 4.5V, 4.0V and 3.0V, 5 Adjustable Inputs with 1. 5V Internal Reference) • • • • • • Input Voltage Range of 2~5V (Good for RTC Battery) Complementary Output to Drive 2N Anpec Electronics data | | |
3 | APX321 | LOW VOLTAGE RAIL-TO-RAIL INPUT AND OUTPUT APX321/APX358/APX324
LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIERS
Features
(For V • • • • •
+
General Description
-
• • • • •
=5V and V =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Diodes data | | |
4 | APX324 | LOW VOLTAGE RAIL-TO-RAIL INPUT AND OUTPUT APX321/APX358/APX324
LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIERS
Features
(For V • • • • •
+
General Description
-
• • • • •
=5V and V =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Diodes data | | |
5 | APX339 | LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD APX393/APX339
LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS
Features
• • • • • • • • Guaranteed 2.7V and 5V performance Industrial temperature range (-40°C to +85°C) Low supply current: 60 µA per Channel Input Common Mode Voltage (V-+0.2V to V+ -0.2V) Low output saturation Diodes data | | |
6 | APX358 | LOW VOLTAGE RAIL-TO-RAIL INPUT AND OUTPUT APX321/APX358/APX324
LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIERS
Features
(For V • • • • •
+
General Description
-
• • • • •
=5V and V =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Diodes data | | |
7 | APX393 | LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD APX393/APX339
LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS
Features
• • • • • • • • Guaranteed 2.7V and 5V performance Industrial temperature range (-40°C to +85°C) Low supply current: 60 µA per Channel Input Common Mode Voltage (V-+0.2V to V+ -0.2V) Low output saturation Diodes data | | |
8 | APX4558 | DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER NEW PRODUCT
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER
Description
The APX4558 device is a dual low noise operational amplifier. The wide bandwidth and low noise make it very suited to audio applications. The device is short-circuit protected, and the internal frequency c Diodes amplifier | | |
9 | APX6219 | PWM Stepper Motor Driver
APX6219
PWM Stepper Motor Driver
Features
• • • • • • • • Able to Drive Both Windings of Bipolar Stepper Motor Up to 750 mA Continuous Output Current for Each Winding Up to 28V Output Sustaining Voltage Internal PWM Current Control Built-in Protection Diode Low Anpec Electronics driver | |
Esta página es del resultado de búsqueda del APXE4R0ARA681MH80G. Si pulsa el resultado de búsqueda de APXE4R0ARA681MH80G se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |