|
|
Número de pieza | SMAJ110CA | |
Descripción | Transient Voltage Supresor Diode | |
Fabricantes | Yint | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SMAJ110CA (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! SMAJ Series
SMAJ Transient Voltage Suppressor Diode Series
General Information
The SMA series is designed to protect voltage sensitive components from high voltage,
high energy transients. They have excellent clamping capability, high surge capability, low
zener impedance and fast response time. The SMA series is supplied in YINT
Semiconductor ’ s exclusive,cost-effective,highly reliable and is ideally suited for use in
communication systems, automotive, numerical controls , process controls, medical
equipment, business machines, power supplies and many other industrial/consumer
Applications.
Molded plastic
glass passivated junction.
Features
Case: DO-214AC/SMA
For surface mounted applications in order to optimize board space.
Polarity:Color band denoted positive end (cathode) except Bidirectional.
Typical failure mode is short from over-specified voltage or current
High Temperature soldering:260°C/10 seconds at terminals.
Terminal:Solder plated,solderable per MIL-STD-750,Method 2026.
Applications
TVS devices are ideal for the protection of
I/O Interfaces, VCC bus and other
vulnerable circuits used in Telecom,
Computer, Industrial and Consumer
electronic applications.
Electrical Characteristics (@ TA = 25°C Unless Otherwise Noted)
Parameter
Symbol
Minimum Peak Pulse Power Dissipation (T = 1 ms) (note 2)
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Steady State Power Dissipation @ TL = 75 °C
Maximum Instantaneous Forward Voltage @ I PP = 35 A
(For Unidirectional Units Only)(Note 5)
Operating Temperature Range
Storage Temperature Range
PPK
IFSM
PM(AV)
VF
TJ
TSTG
Value
400
40
1.0
3.5/6.5
-55 to +150
-55 to +175
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.
5. VF<3.5V for VBR< 200V and VF <6.5V for VBR> 201V.
Unit
Watts
Amps
Watts
Volts
°C
°C
1
WWW.YINT.COM.CN
VER4.0
1 page PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
SMAJ Series
Mounting Pad Layout
Disclaimer
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device
performance may vary over time.
Users should verify actual device performance in their specific applications.
5
WWW.YINT.COM.CN
VER4.0
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SMAJ110CA.PDF ] |
Número de pieza | Descripción | Fabricantes |
SMAJ110C | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS | Bytes |
SMAJ110C | Surface Mount Transient Voltage Suppressor | YENYO |
SMAJ110C | 400Watts Surface Mount Transient Voltage Suppressor | LGE |
SMAJ110CA | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS | Bytes |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |