DataSheet.es    


PDF STR-V828 Data sheet ( Hoja de datos )

Número de pieza STR-V828
Descripción FM STEREO FM-AM RECEIVER MANUAL
Fabricantes Sony 
Logotipo Sony Logotipo



Hay una vista previa y un enlace de descarga de STR-V828 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! STR-V828 Hoja de datos, Descripción, Manual

STR-DE835/DE935/SE591/V828
SERVICE MANUAL
Ver 1.1 2002. 02
Photo : STR-DE935
US Model
STR-DE835/DE935/SE591
Canadian Model
STR-DE835/DE935
E Model
Australian Model
PX Model
STR-DE835
Chinese Model
STR-V828
Manufactured under license from Dol by Labo ratories
Licensing Corporation.
“DOLBY” and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 loads, both channels driven, from 20 – 20,000 Hz; rated 110
W(STR-DE935) and 100 W(STR-DE835/SE591) per channel minimum
RMS power, with no more than 0.09% toral harmonic distortion from 250
mW to rated output (USA model only).
Amplifier section
POWER OUTPUT
Stereo mode
Surround mode
(820Hz – 20kHz, THD 0.09%)
USA, Canadian models
STR-DE935 : 110W + 110W
STR-DE835/SE591 : 100W + 100W
Other models
95W + 95W
(820Hz-20kHz, THD 0.09%)
135W + 135W
(8at 1kHz, THD 10%)
USA, Canadian models
(8at 1kHz, THD 0.8%)
STR-DE935
Front: 110W + 110W
Centera): 110W
Reara): 110W + 110W
STR-DE835/SE591
Front: 100W + 100W
Centera): 100W
Reara): 100W + 100W
Other models
Rated power
(8at 1kHz, THD 0.7%)
Front: 100W + 100W
Centera): 100W
Reara): 100W + 100W
Reference
(820Hz-20Hz, THD 0.9%)
Front: 95W + 95W
Centera): 95W
Reara): 95W + 95W
(8at 1kHz, THD 10%)
Front: 135W + 135W
Centera): 135W
Reara): 135W + 135W
a) Depending on the sound field settings and the source, there may be no
sound output.
Dynamic power output
STR-DE935 :
STR-DE835/SE591 :
Frequency response
165W + 165W, 8
250W + 250W, 4
155W + 155W, 8
240W + 240W, 4
PHONO: RIAA
equalization curve ±0.5 dB
CD, TAPE, MD/DAT, TAPE/MD, DVD/LD,
TV/SAT, VIDEO 1, 2, and VIDEO 3(STR-
DE935 only):
10Hz – 50kHz + 0.5/–2dB (with sound field,
equalizer, and bass boost bypassed)
Continued on next page
FM STEREO FM-AM RECEIVER
9-928-901-12
2002B1600-1
© 2002.02
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
http://www.Datasheet4U.com

1 page




STR-V828 pdf
Rear Panel
1
23
4
56
7
8
@¡ @º !ª !• !¶ !§ !∞ !¢ !£ !™
09
1 ANTENNA
2 DIGITAL
3 5.1 CH INPUT
4 SPEAKERS (FRONT)
5 SPEAKERS (REAR)
6 SPEAKERS (CENTER)
7 WOOFER
8 INPEDANCE SELECTOR
9 AC power cord
AC OUTLET
S-LINK
!™ 2ND AUDIO OUT
VIDEO 1
VIDEO 2
!∞ DVD/LD
(US, Canadian, Australian models)
DVD
(EXCEPT US, Canadian, Australian models)
TV/SAT
(US, Canadian, Australian models)
TV/LD
(EXCEPT US, Canadian, Australian models)
TAPE (DE935 MODEL)
!• MD/DAT (DE935 MODEL)
MD/TAPE (EXCEPT DE935)
CD
PHONO
MONITOR
SECTION 2
SERVICING NOTE
1. When the front panel is removed, theVR board is removed at the
same time. Consequently the LEDs cannot be turned on and the
sound volume cannot be increased or decreased from the remote
control.
2. When servicing the DIGITAL board, be sure to connect the earth
land of the DIGIT AL board with the chassis frame so that the
earth potential of the DIGITAL board must not be floated from
the chassis frame.
SECTION 3
TEST MODE
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
* Procedure:
While depressing the ENTER, the LEVEL and the EQ buttons
simultaneously, press the power [1/u] button to turn on the main
power. All segments turn on at the same time, then each segment
turns on press the ENTER button.
AM CHANNEL STEP 9 kHz/10 kHz
SELECTION MODE (US,Canadian Model)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Set the FUNCTION to AM. Turn off the main power.
While depressing theTUNING+ button or the PRESETTUNING
+ button, press the power [1/u] button to turn on the main powe.r
Either the message AM 9kHz Step or AM 10kHz Step appears.
Select the desired step.
FACTORY SET MODE
* All preset contents are reset to the default setting.
* Procedure:
While depressing the SET UP, the LEVEL and the ENTER buttons
simultaneously, press the power [ 1/u] button to turn on the main
power. The message Factry Set appears and the present contents
are reset to the default values.
ALL CLEAR MODE
* All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
* Procedure:
While depressing the SET UP button simultaneously , press the
power [1/u] button to turn on the main powe. rThe machine enters
the DEMO mode.DEMO mode: Wait a while, then the
demonstration starts. If the power [ 1/u] button is pressed often
the demonstration has started, the power is turned of f, and the
demonstration resumes if the power1[/u] button is pressed again.
ALL CLEAR mode; If the power [ 1/u] button is pressed often
the machine enters the DEMO mode, but before the demonstration
starts, the display is turned of. Press [1/u] again. No response is
returned. The press [ 1/u] again. The preset data is cleared and
the machine enters the normal power-on state.
DSP TEST MODE
* It tests whether the DSP works correctly or not. When the DSP
test is activated, the test data is output from the DSP (IC1401:
CXD2712R) of the DIGITAL board and is written in the RAM
(IC1402: IDT71V016S). When the test data is read from the RAM
by the DSP, the data output must be equivalent to the original
data. If they disagree, an error is triggered. Errors can be caused
by the broken data line or defective soldering.
* Procedure
While pressing the SETUP, LEVEL and SUR buttons, press the
POWER button to enter the DSP test mode. The message DSP
TEST MODE appears. When an error occurs, the message DSP2
ERROR is displayed. When there is no error, the message DSP2
NO ERROR appears and the 1 kHz signal is output to all channels.
Then, the mode can be switched the (SIGNWAVE) (THROUGH)
and (INPULSE) mode.
VERSION MODE
* When this mode is used, the microprocessor version number is
displayed.
* Procedure:
Press the POWER button while pressing the ENTER, LEVEL,
and SUR buttons to turn on the powe.rThe microprocessor version
number appears as follows.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
While depressing the SOUND FIELD MODE button, press the
power [1/u] button to turn on the main power. The message S.F
Initialize appears and initialization is performed.
—5—
—6—

5 Page





STR-V828 arduino
4-6. SCHEMATIC DIAGRAM DIGITAL SECTION(3/3) • See page 19 for printed wirig board. • See page 54 for IC Pin Functions. • See page 59 for IC Block Diagrams.
STR-DE835/DE935/SE591/V828
— 17 —
— 18 —

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet STR-V828.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
STR-V828FM STEREO FM-AM RECEIVER MANUALSony
Sony

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar