|
|
Datasheet LM94 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | LM94 | LM94 TruTherm Hardware Monitor with PI Loop Fan Control for Server Management (Rev. C) |  Texas Instruments | data |
| 2 | LM94 | TruTherm Hardware Monitor with PI Loop Fan Control for Server Management April 2006
LM94 TruTherm™ Hardware Monitor with PI Loop Fan Control for Server Management
LM94 TruTherm™ Hardware Monitor with PI Loop Fan Control for Server Management
1.0 General Description
The LM94 hardware monitor has a two wire digital interface compatible with SMBus |  National Semiconductor | data |
| 3 | LM94021 | LM94021/LM94021Q Multi-Gain Analog Temperature Sensor (Rev. E) | Texas Instruments | sensor |
| 4 | LM94021 | Multi-Gain Analog Temperature Sensor February 2005
LM94021 Multi-Gain Analog Temperature Sensor
LM94021 Multi-Gain Analog Temperature Sensor
General Description
The LM94021 is a precision analog output CMOS integrated-circuit temperature sensor that operates at a supply voltage as low as 1.5V. While operating over | National Semiconductor | sensor |
| 5 | LM94022 | LM94022/-Q1 1.5-V SC70 Multi-Gain Analog Temperature Sensor With Class-AB Output (Rev. F) | Texas Instruments | sensor |
LM9 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | LM90 | LM90 +-3C Accurate Remote Diode Local Dig Temp Sensor w/2-Wire Interface (Rev. A) Texas Instruments diode | | |
| 2 | LM90 | Remote Diode and Local Digital Temperature Sensor LM90 ±3˚C Accurate, Remote Diode and Local Digital Temperature Sensor with Two-Wire
Interface
February 2002
LM90
±3˚C Accurate, Remote Diode and Local Digital
Temperature Sensor with Two-Wire Interface
General Description
The LM90 is an 11-bit digital temperature sensor with a 2-wire System National Semiconductor diode | | |
| 3 | LM9011 | LM9011 Electronic Ignition Interface (Rev. D) Texas Instruments data | | |
| 4 | LM9011 | Electronic Ignition Interface LM9011 Electronic Ignition Interface
February 2000
LM9011 Electronic Ignition Interface
General Description
The LM9011 is an interface circuit which integrates the timing detection and logic control functions required for an automotive electronic ignition system into one device. A VRS interface is National Semiconductor data | | |
| 5 | LM9013G | Amplifier Transistors LM9013G, LM9013H
Preferred Devices
Amplifier Transistors
NPN Silicon
• Moisture Sensitivity Level: 1
MAXIMUM RATINGS Rating
Symbol
Value
Unit
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current – Continuous
Total Device Dissipation @ TA = 25°C Derate abo  ON Semiconductor transistor | | |
| 6 | LM9013H | Amplifier Transistors LM9013G, LM9013H
Preferred Devices
Amplifier Transistors
NPN Silicon
• Moisture Sensitivity Level: 1
MAXIMUM RATINGS Rating
Symbol
Value
Unit
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current – Continuous
Total Device Dissipation @ TA = 25°C Derate abo ON Semiconductor transistor | | |
| 7 | LM9022 | LM9022 Vacuum Fluorescent Display Filament Driver (Rev. E) Texas Instruments driver | |
| Esta página es del resultado de búsqueda del LM94. Si pulsa el resultado de búsqueda de LM94 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |