|
|
Número de pieza | PME271Y | |
Descripción | EMI Suppressor / Class Y2 / Metallized Paper | |
Fabricantes | EVOX RIFA | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PME271Y (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! PME271Y
• EMI suppressor, class Y2, metallized paper
• 0.001 – 0.15 µF, 250 VAC up to +100 °C, 300 VAC up to +115 °C
• The highest possible safety regarding
active and passive flammability.
• Self-extinguishing UL 94V-0
encapsulation material.
• Excellent self-healing properties.
Ensures long life even when subjected to
frequent overvoltages.
• Good resistance to ionisation due to
impregnated dielectric.
• High dU/dt capability.
• Small dimensions.
• Safety approvals for worldwide use.
• The capacitors meet the most stringent
IEC humidity class, 56 days.
TYPICAL APPLICATIONS
CONSTRUCTION
• The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially in
applications having continuous
operation.
LB
The capacitors are intended for use as
interference suppressors in Y2 (line-to-
earth) applications.
Multi-layer metallized paper. Encapsulated
and impregnated in self-extinguishing
material meeting the requirements of UL
94V-0.
p ± 0.5
∅d
TECHNICAL DATA
PME271Y PME271YA-E
Rated voltage VAC, 50/60Hz 250
300
Capacitance range µF
0.001–0.1 0.001–0.15
Temperature range °C
–40/+100
–40/+115
Climatic category IEC
40/100/56/B 40/115/56/B
Capacitance tolerance
Approvals
Dissipation factor tanδ
Insulation resistance
In DC applications
Resonance frequency
Test voltage between
terminals
± 10% for C > 0.1 µF, code K
± 20% for C ≤ 0.1 µF, code M
S, N, D, FI, VDE, SEV, IMQ, UL, CSA
≤ 1.3 % at 1 kHz
C ≤ 0.33 µF ≥ 12000 MΩ
Measured at 500 VDC after 60 s, +23°C
Recommended voltage: ≤ 1000 VDC
Tabulated self-resonance
lead lengths.
frequencies
f0
refer
to
5
mm
The 100% screening factory test is carried out at 3000
VDC. The voltage level is selected to meet the
requirements in applicable equipment standards. All
electrical characteristics are checked after the test.
dd== 010001...806...680ffffffoooooorrrrrr pppppp ======112121055550...224...,2422, 02.30,.32,2.252.5
l l== sstatannddardd: 330 ++55/-/0-0mmmm(co(cdoedRe30R)30)
ooppttiioonn: shsohrotrlteleaaddss,, ttoolleerraannccee+0+/0-1/-m1mmm
O(Osthtthaeenrrdlaleeraad(sdd6tlaelmennnmdggta,htrcshdosod6neormnRe0qmr6ue)e,qscuto.edste R06)
dB
Attenuation
70 0.47 µF
60 0.047 µF
50
40
0.0047 µF
30
20
10
0
1
3 5 10
f
30 100 200 MHz
Suppression versus frequency. Typical values.
Vibration
ENVIRONMENTAL TEST DATA
IEC 60068-2-6, Test Fc 3 directions at 2 hour each,
No visible damage, No open or short circuit
10 – 500 Hz at 0.75 mm or 98 m/s2
Bump
IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2
No visible damage, No open or short circuit
Solderability
IEC 60068-2-20, Test Ta Solder globule method
Wetting time
for d ≤ 0.8 < 1 s
for d > 0.8 < 1.5 s
Active flammability EN 132400
Passive flammability IEC 60384-14 (1993), EN 132400
Humidity
IEC 60068-2-3, Test Ca +40°C and 90 – 95% R.H.
56 days
70
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet PME271Y.PDF ] |
Número de pieza | Descripción | Fabricantes |
PME271E | (PME271M/E) EMI Suppressor / Metallized Paper | Evox - Rifa |
PME271Exxx | (PME271M/E) EMI Suppressor / Metallized Paper | Evox - Rifa |
PME271M | (PME271M/E) EMI Suppressor / Metallized Paper | Evox - Rifa |
PME271Mxxx | (PME271M/E) EMI Suppressor / Metallized Paper | Evox - Rifa |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |