|
|
PDF OPB817 Data sheet ( Hoja de datos )
| Número de pieza | OPB817 | |
| Descripción | Slotted Op tical Switch | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OPB817 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Product Bulletin OPB817
February 2001
Slotted Optical Switch
Type OPB817
Features
• .20”(5.08 mm) wide gap
• 24”minimum, 26 AWG wire leads
•Dust protection
• .86”(21.8 mm) deep slot
Description
The OPB817 consists of an infrared
emitting diode and an NPN silicon
phototransistor mounted in an opaque
housing with clear windows for dust
protection. The extended deep slot
allows for a longer reach of the optical
center line from the mounting plane, .90”
(22.86 mm).
Internal apertures are .010”x 0.06”for
the phototransistor “S side”and .050”x
.06”for the LED “E side”.
Custom electrical, wire or cabling is
available. Contact your local
representative or Optek for more
information.
Visit our website at www.optekinc.com
or email us at [email protected]
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . . -40°C to +80°C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
Output Phototransistor
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
NOTES:
(1) Derate linearly 1.67 mW/°C above 25°C.
(2) All parameters tested using pulse technique.
(3) Clear dust protection.
PRECAUTIONS: Exposure of the plastic body to chlorinated hydrocarbons and ketones such as
thread lock and instant adhesive products will degrade the plastic body. Cleaning agents
methanol and isopropanol are recommended. Spray or wipe do not submerge.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
29
(972) 323-2200
Fax (972) 323-2396
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet OPB817.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OPB810 | Wide Gap Slotted Optical Switch |  OPTEK |
| OPB810L | WIDE GAP SLOTTED OPTICAL SWITCHES | OPTEK |
| OPB810W | WIDE GAP SLOTTED OPTICAL SWITCHES | OPTEK |
| OPB811 | Wide Gap Slotted Optical Switch | OPTEK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |