|
|
Datasheet MCP601 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | MCP601 | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi |  Microchip Technology | cmos |
| 2 | MCP601-I | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi | Microchip Technology | cmos |
| 3 | MCP601-IOT | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi | Microchip Technology | cmos |
| 4 | MCP601-IP | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi | Microchip Technology | cmos |
| 5 | MCP601-ISL | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi | Microchip Technology | cmos |
| 6 | MCP601-ISN | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi | Microchip Technology | cmos |
| 7 | MCP601-IST | 2.7V to 5.5V Single Supply CMOS Op Amps MCP601/602/603/604
2.7V to 5.5V Single Supply CMOS Op Amps
FEATURES
• • • • • • • • • Specifications rated from 2.7V to 5.5V supplies Rail-to-rail swing at output Common-mode input swing below ground 2.8MHz GBWP Unity gain stable Low power IDD = 325µA max Chip Select capability wi | Microchip Technology | cmos |
| 8 | MCP601R | 2.7V to 6.0V Single Supply CMOS Op Amps MCP601/1R/2/3/4
2.7V to 6.0V Single Supply CMOS Op Amps
Features
• • • • • • • • Single-Supply: 2.7V to 6.0V Rail-to-Rail Output Input Range Includes Ground Gain Bandwidth Product: 2.8 MHz (typical) Unity-Gain Stable Low Quiescent Current: 230 µA/amplifier (typical) Chip Select (CS) | Microchip Technology | cmos |
MCP Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | MCP100 | Microcontroller Supervisory Circuit with Push-Pull Output MCP100/101
Microcontroller Supervisory Circuit with Push-Pull Output
FEATURES
• Holds microcontroller in reset until supply voltage reaches stable operating level • Resets microcontroller during power loss • Precision monitoring of 3V, 3.3V, and 5V systems • 7 voltage trip points available � Microchip Technology controller | | |
| 2 | MCP101 | Microcontroller Supervisory Circuit with Push-Pull Output MCP100/101
Microcontroller Supervisory Circuit with Push-Pull Output
FEATURES
• Holds microcontroller in reset until supply voltage reaches stable operating level • Resets microcontroller during power loss • Precision monitoring of 3V, 3.3V, and 5V systems • 7 voltage trip points available � Microchip Technology controller | | |
| 3 | MCP102 | Micropower Voltage Supervisors
MCP102/103/121/131
Micropower Voltage Supervisors
Features
• Ultra low supply current: 1.75 µA (steady state max.) • Precision monitoring options of: - 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V and 4.63V • Resets microcontroller in a power-loss event • RST pin (Active-lo Microchip Technology data | | |
| 4 | MCP103 | Micropower Voltage Supervisors
MCP102/103/121/131
Micropower Voltage Supervisors
Features
• Ultra low supply current: 1.75 µA (steady state max.) • Precision monitoring options of: - 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V and 4.63V • Resets microcontroller in a power-loss event • RST pin (Active-lo Microchip Technology data | | |
| 5 | MCP111 | Micropower Voltage Detector MCP111/112
Micropower Voltage Detector
Features
• Ultra-Low Supply Current: 1.75 µA (Max.) • Precision Monitoring Options Of:
- 1.90V, 2.32V, 2.63V, 2.90V, 2.93V, 3.08V, 4.38V and 4.63V
• Resets Microcontroller in a Power-Loss Event • Active-Low VOUT Pin:
- MCP111 Active-Low, Open-Drain - Microchip Technology detector | | |
| 6 | MCP112 | Micropower Voltage Detector MCP111/112
Micropower Voltage Detector
Features
• Ultra-Low Supply Current: 1.75 µA (Max.) • Precision Monitoring Options Of:
- 1.90V, 2.32V, 2.63V, 2.90V, 2.93V, 3.08V, 4.38V and 4.63V
• Resets Microcontroller in a Power-Loss Event • Active-Low VOUT Pin:
- MCP111 Active-Low, Open-Drain -  Microchip detector | | |
| 7 | MCP120 | (MCP120 / MCP130) Microcontroller Supervisory Circuit with Open Drain Output MCP120/130
Microcontroller Supervisory Circuit with Open Drain Output
FEATURES
• Holds microcontroller in reset until supply voltage reaches stable operating level • Resets microcontroller during power loss • Precision monitoring of 3V, 3.3V and 5V systems • 7 voltage trip points available � Microchip Technology controller | | |
| 8 | MCP121 | Micropower Voltage Supervisors
MCP102/103/121/131
Micropower Voltage Supervisors
Features
• Ultra low supply current: 1.75 µA (steady state max.) • Precision monitoring options of: - 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38V and 4.63V • Resets microcontroller in a power-loss event • RST pin (Active-lo Microchip Technology data | | |
| 9 | MCP1252 | (MCP1252 / MCP1253) Low Noise / Positive-Regulated Charge Pump MCP1252/3
Low-Noise, Positive-Regulated Charge Pump
Features:
• Inductorless, Buck/Boost, DC/DC Converter • Low Power: 80 µA (Typical) • High Output Voltage Accuracy:
- ±2.5% (VOUT Fixed) • 120 mA Output Current • Wide Operating Temperature Range:
- Industrial Temperature (I): -40°C to Microchip Technology data | |
| Esta página es del resultado de búsqueda del MCP601. Si pulsa el resultado de búsqueda de MCP601 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |