DataSheet.es    


PDF MBR3035CT Data sheet ( Hoja de datos )

Número de pieza MBR3035CT
Descripción Dual Common Cathode Schottky Rectifier
Fabricantes Vishay Siliconix 
Logotipo Vishay Siliconix Logotipo



Hay una vista previa y un enlace de descarga de MBR3035CT (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! MBR3035CT Hoja de datos, Descripción, Manual

www.vishay.com
MBR30x5CT, MBRF30x5CT, MBRB30x5CT
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
TO-220AB
ITO-220AB
MBR30x5CT
PIN 1
PIN 2
PIN 3
CASE
3
2
1
TO-263AB
K
MBRF30x5CT 1 2 3
PIN 1
PIN 2
PIN 3
2
1
MBRB30x5CT
PIN 1
K
PIN 2
HEATSINK
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
VF
TJ max.
Package
2 x 15 A
35 V to 45 V
200 A
0.60 V
150 °C
TO-220AB, ITO-220AB, TO-263AB
Diode variations
Common cathode
FEATURES
• Power pack
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current
total device
per diode
VRRM
VRWM
VDC
IF(AV)
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load per diode
IFSM
Peak repetitive reverse current per diode at tp = 2.0 μs, 1 kHz
Voltage rate of change (rated VR)
Operating junction temperature range
Storage temperature range
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
IRRM
dV/dt
TJ
TSTG
VAC
MBR3035CT MBR3045CT
35 45
35 45
35 45
30
15
200
2.0
10 000
- 65 to + 150
- 65 to + 175
1500
UNIT
V
A
V/μs
°C
V
Revision: 11-Jun-13
1 Document Number: 88677
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 page




MBR3035CT pdf
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet MBR3035CT.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MBR3035CTSCHOTTKY BARRIER RECTIFIERPan Jit International
Pan Jit International
MBR3035CT30 Amp Rectifier 30 to 60 Volts Schottky BarrierMicro Commercial Components
Micro Commercial Components
MBR3035CTDual Common Cathode Schottky RectifierVishay Siliconix
Vishay Siliconix
MBR3035CT30 A SCHOTTKY RECTIFIERSDigitron Semiconductors
Digitron Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar