|
|
Número de pieza | DS96174 | |
Descripción | RS-485/RS-422 Quad Differential Line Drivers | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DS96174 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! June 1998
DS96172/DS96174
RS-485/RS-422 Quad Differential Line Drivers
General Description
The DS96172 and DS96174 are high speed quad differential
line drivers designed to meet EIA Standard RS-485. The de-
vices have TRI-STATE® outputs and are optimized for bal-
anced multipoint data bus transmission at rates up to
10 Mbps. The drivers have wide positive and negative com-
mon mode range for multipoint applications in noisy environ-
ments. Positive and negative current-limiting is provided
which protects the drivers from line fault conditions over a
+12V to −7.0V common mode range. A thermal shutdown
feature is also provided and occurs at junction temperature
of approximately 160˚C. The DS96172 features an active
high and active low Enable, common to all four drivers. The
DS96174 features separate active high Enables for each
driver pair. Compatible RS-485 receivers, transceivers, and
repeaters are also offered to provide optimum bus perfor-
mance. The respective device types are DS96173,
DS96175, DS96176 AND DS96177.
Features
n Meets EIA Standard RS-485 and RS-422A
n Monotonic differential output switching
n Transmission rate to 10 Mbs
n TRI-STATE outputs
n Designed for multipoint bus transmission
n Common mode output voltage range: −7V to +12V
n Operates from single +5V supply
n Thermal shutdown protection
n DS96172/DS96174 are lead and function compatible
with the SN75172/75174 or the AM26LS31/MC3487
respectively
Connection Diagrams
16-Lead DIP
DS96172
16-Lead DIP
DS96174
Top View
DS009626-1
Order Number DS96172CN or DS96174CN
See NS Package Number N16E
Top View
DS009626-2
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1998 National Semiconductor Corporation DS009626
www.national.com
1 page Typical Application
Note: The line length should be terminated at both ends in its characteristic impedance.
Stub lengths off the main line should be kept as short as possible.
FIGURE 6.
DS009626-13
5 www.national.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet DS96174.PDF ] |
Número de pieza | Descripción | Fabricantes |
DS96172 | RS-485/RS-422 Quad Differential Line Drivers | National Semiconductor |
DS96172 | DS96172/DS96174 RS-485/RS-422 Quad Differential Line Drivers (Rev. D) | Texas Instruments |
DS96172CN | RS-485/RS-422 Quad Differential Line Drivers | National Semiconductor |
DS96173 | RS-485/RS-422 Quad Differential Line Receivers | National Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |