DataSheet.es    


PDF MC10H606 Data sheet ( Hoja de datos )

Número de pieza MC10H606
Descripción Registered Hex TTL/PECL Translator
Fabricantes Motorola Semiconductors 
Logotipo Motorola Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de MC10H606 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! MC10H606 Hoja de datos, Descripción, Manual

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Registered Hex TTL/PECL
Translator
The MC10/100H606 is a 6–bit, registered, single supply TTL to PECL
translator. The device features differential PECL outputs as well as a choice
between either a differential PECL clock input or a TTL clock input. The
asynchronous master reset control is a PECL level input.
With its differential PECL outputs and TTL inputs the H606 device is
ideally suited for the transmit function of a HPPI bus type board–to–board
interface application. The on chip registers simplify the task of synchronizing
the data between the two boards.
The device is available in either ECL standard: the MECL10H device is
compatible with MECL 10KH logic levels, with a VCC of +5 volts; while the
100H device is compatible with 100K logic levels, with a VCC of +5 volts.
Differential 50ECL Outputs
Choice Between Differential PECL or TTL Clock Input
Single Power Supply
Multiple Power and Ground Pins to Minimize Noise
LOGIC SYMBOL
1 OF 6 BITS
Dn D Q
Qn
Qn
CLK
R
CLK
CLK
TCLK
*
MR
VBB
* 1. When using PECL inputs, TCLK must be tied to ground (0V).
2. When using only one PECL input, the unused PECL input must be tied
to VBB, and TCLK must be tied to ground (0V).
3. When using TCLK, both PECL inputs must be tied to ground (0V).
MC10H606
MC100H606
FN SUFFIX
PLASTIC PACKAGE
CASE 776–02
PIN NAMES
PIN FUNCTION
D0–D5
CLK, CLK
TCLK
MR
Q0–Q5
Q0–Q5
VCCE
VCCT
GND
TTL Data Inputs
Differential PECL Clock Input
TTL Clock Input
PECL Master Reset Input
True PECL Outputs
Inverted PECL Outputs
PECL VCC (+5.0V)
TTL VCC (+5.0V)
TTL/PECL Ground
TRUTH TABLE
Dn MR TCLK/CLK
LL
HL
XH
Z
Z
X
Z = LOW to HIGH Transition
Qn+1
L
H
L
Pinout: 28–Lead PLCC (Top View)
D1 D2 VCCT D3 D4 D5 VCCE
25 24 23 22 21 20 19
D0 26
18 Q5
TCLK 27
17 Q5
VBB 28
16 Q4
CLK 15 Q4
CLK 2
MR 3
14 VCCE
13 Q3
VCCE 4
12 Q3
5 6 7 8 9 10 11
Q0 Q0 GND Q1 Q1 Q2 Q2
MECL 10H is a trademark of Motorola, Inc.
9/96
© Motorola, Inc. 1996
2–311
REV 1

1 page




MC10H606 pdf
MC10H606 MC100H606
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–800–441–2447
Mfax: [email protected] – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MECL Data
DL122 — Rev 6
*MC10H606/D*2–315
MC10H606/D
MOTOROLA

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet MC10H606.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MC10H6009-Bit TTL/ECL TranslatorON Semiconductor
ON Semiconductor
MC10H6009-Bit TTL to ECL TranslatorMotorola Semiconductors
Motorola Semiconductors
MC10H600FN9-Bit TTL/ECL TranslatorMotorola Semiconductors
Motorola Semiconductors
MC10H6019-Bit ECL/TTL TranslatorMotorola Semiconductors
Motorola Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar