|
|
Datasheet APXF6R3ARA271MF80G Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | APXF6R3ARA271MF80G | CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Surface Mount
PXFNPCAPTM-
Upgrade!
Series
・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte.
・Rated voltage range : 2 to 10Vdc, Capacitance range : 120 to 1,000µF ・Case size range : | NIPPON CERAMIC | capacitor |
APX Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | APX1117 | 1A LOW DROPOUT POSITIVE ADJUSTABLE
APX1117
1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR
Features
• • • • • • • • 1.3V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed 1. Diodes Incorporated data | | |
2 | APX1690 | 9-Set Over Voltage Protector
APX1690
9-Set Over Voltage Protector
Features
• 9-Set Voltage Monitors (4 Fixed Inputs for 7.0V, 4.5V, 4.0V and 3.0V, 5 Adjustable Inputs with 1. 5V Internal Reference) • • • • • • Input Voltage Range of 2~5V (Good for RTC Battery) Complementary Output to Drive 2N Anpec Electronics data | | |
3 | APX321 | LOW VOLTAGE RAIL-TO-RAIL INPUT AND OUTPUT APX321/APX358/APX324
LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIERS
Features
(For V • • • • •
+
General Description
-
• • • • •
=5V and V =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Diodes data | | |
4 | APX324 | LOW VOLTAGE RAIL-TO-RAIL INPUT AND OUTPUT APX321/APX358/APX324
LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIERS
Features
(For V • • • • •
+
General Description
-
• • • • •
=5V and V =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Diodes data | | |
5 | APX339 | LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD APX393/APX339
LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS
Features
• • • • • • • • Guaranteed 2.7V and 5V performance Industrial temperature range (-40°C to +85°C) Low supply current: 60 µA per Channel Input Common Mode Voltage (V-+0.2V to V+ -0.2V) Low output saturation Diodes data | | |
6 | APX358 | LOW VOLTAGE RAIL-TO-RAIL INPUT AND OUTPUT APX321/APX358/APX324
LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIERS
Features
(For V • • • • •
+
General Description
-
• • • • •
=5V and V =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Diodes data | | |
7 | APX393 | LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD APX393/APX339
LOW VOLTAGE RAIL-TO-RAIL INPUT DUAL/QUAD COMPARATORS
Features
• • • • • • • • Guaranteed 2.7V and 5V performance Industrial temperature range (-40°C to +85°C) Low supply current: 60 µA per Channel Input Common Mode Voltage (V-+0.2V to V+ -0.2V) Low output saturation Diodes data | | |
8 | APX4558 | DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER NEW PRODUCT
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE OPERATIONAL AMPLIFIER
Description
The APX4558 device is a dual low noise operational amplifier. The wide bandwidth and low noise make it very suited to audio applications. The device is short-circuit protected, and the internal frequency c Diodes amplifier | | |
9 | APX6219 | PWM Stepper Motor Driver
APX6219
PWM Stepper Motor Driver
Features
• • • • • • • • Able to Drive Both Windings of Bipolar Stepper Motor Up to 750 mA Continuous Output Current for Each Winding Up to 28V Output Sustaining Voltage Internal PWM Current Control Built-in Protection Diode Low Anpec Electronics driver | |
Esta página es del resultado de búsqueda del APXF6R3ARA271MF80G. Si pulsa el resultado de búsqueda de APXF6R3ARA271MF80G se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |