DataSheet.es G0121SN01-V0 Hoja de datos PDF

PDF G0121SN01-V0 Datasheet ( Hoja de datos )


SVGA Color TFT-LCD Module - G0121SN01-V0 - AUO

Número de pieza G0121SN01-V0
Descripción SVGA Color TFT-LCD Module
Fabricantes AUO 
Logotipo AUO Logotipo
Vista previa
1 Page
		
G0121SN01-V0 datasheet
G0121SN01-V0 pdf, arduino
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnection from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a module has to be put back into the packing container slot after once it
was taken out from the container, do not press the center of the CCFL Reflector
edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise
the TFT module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the interface Connector of the TFT module.
11) After installation of the TFT module into an enclosure, do not twist nor bend the
TFT module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from
outside. Otherwise the TFT module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD
module should be supplied by power complied with requirements of Limited Power
Source, or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current
Circuit. Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G121SN01 V.0 ver.0
5/28





PáginasTotal 28 Páginas
PDF Descargar[ G0121SN01-V0.PDF ]

Enlace url


Hoja de datos destacado

Número de piezaDescripciónFabricantes
G0121SN01-V0SVGA Color TFT-LCD ModuleAUO
AUO


Número de piezaDescripciónFabricantes
SSM2604

Low Power Audio Codec.

Analog Devices
Analog Devices
SLG3NB3331

32.768 kHz and MHz GreenCLK.

Silego
Silego
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices
SDC1741

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z




www.DataSheet.es    |   2017   |  Contacto  |  Buscar