|
|
Número de pieza | T-51750 | |
Descripción | LCD MODULE | |
Fabricantes | OPTREX | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de T-51750 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! Optrex America, Inc.
46723 Five Mile Road
Plymouth, MI 48170 USA
734.416.8500
www.optrex.com
Type No.
Document Number
Revision
Date
T-51750-SERIES
LCD MODULE APPLICATION NOTE
AN-T-51750-01
0.0
2004/06/06
TABLE OF CONTENTS
http://www.DataSheet4U.net/
1. Purpose........................................................................................................................................ 2
2. T-51750 Errata Specifications ..................................................................................................... 2
3. T-51750-Series & T-51382-Series General Differences ............................................................. 2
4. T-51750-Series & T-51382-Series Mechanical Differences ........................................................ 3
5. T-51750-Series & T-51382-Series Electrical Differences............................................................ 3
6. T-51750-Series & T-51382-Series I/O Differences ..................................................................... 6
7. T-51750-Series & T-51382-Series Optical Differences ............................................................... 7
8. T-51750-Series & T-51382-Series Packaging Differences ......................................................... 9
9. Conclusions ................................................................................................................................. 9
Optrex America
AN-T-51750-01
Rev. 0.0
Page 1 of 10
datasheet pdf - http://www.DataSheet4U.net/
1 page T-51750-SERIES APPLICATION NOTE
Figure 2 -- Hirose DF9-series Connector Differences
T-51750-Series DF9B-31P-1V
Metal Fitting, No Boss
T-51382-Series DF9A-31P-1V
Without Fitting, With Boss
5.4.
The T-51750 uses a JST BHR-02(8.0)VS-1N CCFLhttp://www.DataSheet4U.net/ connector. The JST USA catalog part
numbering (see the following table) for the BH-series crimp connector leads to the conclusion the
CCFL connector part number is incorrect and should be BHR-03VS-1. The difference in part
numbers is due to the catalog used (Japan versus USA). The BHR-03VS-1 is a plastic housing;
the end user must insert crimp pins.
The difference in part numbering schemes creates confusion. JST Japan eliminates this
confusion by describing the part as follows:
BHR-number of circuits(pin pitch)VS-1N
This system describes a 2 conductor crimp connector with 8.0 mm pin pitch. The mating
connector then is the SM02(8.0)B-BHS-1-TB. . The inverter should use these female, surface
mount connectors. Please note the SM02(8.0)B-BHS-1-TB part number is valid in JST literature.
Optrex America
AN-T-51750-01
Rev. 0.0
Page 5 of 10
datasheet pdf - http://www.DataSheet4U.net/
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet T-51750.PDF ] |
Número de pieza | Descripción | Fabricantes |
T-51750 | LCD MODULE | OPTREX |
T-51750AA | LCD_Module | OPTREX |
T-51750GD065J-FW-AB | LCD Module | OPTREX |
T-51750GD065J-FW-ADN | LCD Module | OPTREX |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |