|
|
PDF 4014BT Data sheet ( Hoja de datos )
| Número de pieza | 4014BT | |
| Descripción | HEF4014B | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 4014BT (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
HEF4014B
8-bit static shift register
Rev. 9 — 21 March 2016
Product data sheet
1. General description
The HEF4014B is a fully synchronous edge-triggered 8-bit static shift register with eight
synchronous parallel inputs (D0 to D7), a synchronous serial data input (DS), a
synchronous parallel enable input (PE), a LOW-to-HIGH edge-triggered clock input (CP)
and buffered parallel outputs from the last three stages (Q5 to Q7).
Operation is synchronous and the device is edge-triggered on the LOW-to-HIGH
transition of CP. Each register stage is of a D-type master-slave flip-flop type. When PE is
HIGH, data is loaded into the register from D0 to D7 on the LOW-to-HIGH transition of CP.
When PE is LOW, data is shifted to the first position from DS, and all the data in the
register is shifted one position to the right on the LOW-to-HIGH transition of CP. The clock
input’s Schmitt trigger action makes it highly tolerant of slower clock rise and fall times.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS
(usually ground). Unused inputs must be connected to VDD, VSS, or another input.
2. Features and benefits
Tolerant of slow clock rise and fall times
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
Specified from 40 C to +85 C
Complies with JEDEC standard JESD 13-B
3. Applications
Parallel-to-serial converter
Serial data queueing
General purpose register
4. Ordering information
Table 1. Ordering information
All types operate from 40 C to +85 C
Type number Package
Name Description
HEF4014BT
SO16
plastic small outline package; 16 leads; body width 3.9 mm
Version
SOT109-1
1 page  
NXP Semiconductors
HEF4014B
8-bit static shift register
9. Recommended operating conditions
Table 5.
Symbol
VDD
VI
Tamb
t/V
Recommended operating conditions
Parameter
Conditions
supply voltage
input voltage
ambient temperature
in free air
input transition rise and fall rate
VDD = 5 V
VDD = 10 V
VDD = 15 V
10. Static characteristics
Min Typ
3-
0-
40 -
--
--
--
Max
15
VDD
+85
3.75
0.5
0.08
Unit
V
V
C
s/V
s/V
s/V
Table 6. Static characteristics
VSS = 0 V; VI = VSS or VDD unless otherwise specified.
Symbol Parameter
Conditions
VDD
VIH
HIGH-level input voltage
IO < 1 A
5V
10 V
15 V
VIL
LOW-level input voltage
IO < 1 A
5V
10 V
15 V
VOH HIGH-level output voltage IO < 1 A 5 V
10 V
15 V
VOL LOW-level output voltage |IO < 1 A 5 V
10 V
15 V
IOH
HIGH-level output current VO = 2.5 V
5V
VO = 4.6 V
5V
VO = 9.5 V
10 V
VO = 13.5 V 15 V
IOL
LOW-level output current VO = 0.4 V
5V
VO = 0.5 V
10 V
VO = 1.5 V
15 V
II input leakage current
15 V
IDD supply current
IO = 0 A
5V
10 V
15 V
CI input capacitance
-
Tamb = 40 C
Min Max
3.5 -
7.0 -
11.0 -
- 1.5
- 3.0
- 4.0
4.95 -
9.95 -
14.95 -
- 0.05
- 0.05
- 0.05
- 1.7
- 0.52
- 1.3
- 3.6
0.52 -
1.3 -
3.6 -
- 0.3
- 20
- 40
- 80
--
Tamb = +25 C
Min Max
3.5 -
7.0 -
11.0 -
- 1.5
- 3.0
- 4.0
4.95 -
9.95 -
14.95 -
- 0.05
- 0.05
- 0.05
- 1.4
- 0.44
- 1.1
- 3.0
0.44 -
1.1 -
3.0 -
- 0.3
- 20
- 40
- 80
- 7.5
Tamb = +85 C Unit
Min Max
3.5 - V
7.0 - V
11.0 - V
- 1.5 V
- 3.0 V
- 4.0 V
4.95 - V
9.95 - V
14.95 - V
- 0.05 V
- 0.05 V
- 0.05 V
- 1.1 mA
- 0.36 mA
- 0.9 mA
- 2.4 mA
0.36 - mA
0.9 - mA
2.4 - mA
- 1.0 A
- 150 A
- 300 A
- 600 A
- - pF
HEF4014B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 9 — 21 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
5 of 13
5 Page 
NXP Semiconductors
HEF4014B
8-bit static shift register
15. Legal information
15.1 Data sheet status
Document status[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
HEF4014B
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 9 — 21 March 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
11 of 13
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet 4014BT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 4014BT | HEF4014B | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |