DataSheet.es V048F015T100 Hoja de datos PDF

V048F015T100 Hoja de datos en formato PDF ( Datasheet )


V048F015T100 Función - (V048x015T100) Voltage Transformation Module - Vicor Corporation

Número de pieza V048F015T100
Descripción (V048x015T100) Voltage Transformation Module
Fabricantes Vicor Corporation 
Logotipo Vicor Corporation Logotipo
Vista previa
		

No Preview Available !

V048F015T100 Hoja de datos, Descripción, Manual
www.DataSheet4U.com
VTM
V•I ChipTM – VTM
Voltage Transformation Module
V048K015T100
K indicates BGA configuration. For other
mounting options see Part Numbering below.
• 48 V to 1.5 V V•I Chip Converter
• 100 A (150 A for 1 ms)
• High density – 400 A/in3
• 125°C operation
• 1 µs transient response
• >3.5 million hours MTBF
Vf = 26 - 55 V
VOUT = 0.8 - 1.7 V
IOUT = 100 A
K = 1/32
ROUT = 1.3 mmax
©
• Small footprint – 93 A/in2
• Typical efficiency 92% at 1.0 V/50 A
• Low weight – 0.5 oz (14 g)
• No output filtering required
• Pick & Place / SMD
• BGA or J-Lead packages
Actual size
Product Description
Absolute Maximum Ratings
The V048K015T100 VI Chip Voltage Transformation
Module (VTM) breaks records for speed, density and
Parameter
Values
Unit
Notes
efficiency to meet the demands of advanced DSP,
FPGA, ASIC, processor cores and microprocessor
applications at the point of load (POL) while providing
+In to -In
+In to -In
-1.0 to 60.0
Vdc
100 Vdc For 100 ms
isolation from input to output. It achieves a response
PC to -In
-0.3 to 7.0
Vdc
time of less than 1 µs and delivers up to 100 A in a
TM to -In
-0.3 to 7.0
Vdc
volume of less than 0.25 in3 while providing low output
voltages with unprecedented efficiency. It may be
paralleled to deliver hundreds of amps at an output
voltage settable from 0.8 to 1.7 Vdc.
P R E L I M I N A RYThe VTM V048K015T100’s nominal output voltage is
1.5 Vdc from a 48 Vdc input factorized bus, Vf, and is
controllable from 0.8 to 1.7 Vdc at no load, and from
0.8 to 1.5 Vdc at full load, over a Vf input range of 26
to 54 Vdc. It can be operated either open- or closed-loop
depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
K = 1/32, and an output resistance, ROUT = 1.0 milliohm, to
enable applications requiring a programmable low
output voltage at high current and high efficiency.
VC to -In
-0.3 to 19.0
Vdc
+Out to -Out
-0.1 to 4.0
Vdc
Isolation voltage
Operating junction temperature
2,250
-40 to 125
Vdc Input to Output
°C See Note
Output current
100 A Continuous
Peak output current
Case temperature during reflow
150
208
A For 1 ms
°C
Storage temperature
-40 to 150
°C
Output power
Peak output power
150 W Continuous
225 W For 1 ms
Note: The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by the temperature monitor (TM) signal and by a shutdown comparator.
Closing the loop back to an input Pre-Regulation
Module (PRM) or DC-DC converter can compensate
for ROUT.
Part Numbering
The 1.5 V VTM achieves break-through current density
of 400 A/in3 in a VI Chip package compatible with
standard pick-and-place and surface mount assembly
processes. The VI Chip BGA package supports in-board
mounting with a low profile of 0.16" (4 mm) over the
board. A J-lead package option supports on-board
surface mounting with a profile of only 0.25" (6 mm)
over the board. The VTM’s fast dynamic response and
low noise eliminate the need for bulk capacitance at the
load, substantially increasing the POL density while
improving reliability and decreasing cost.
V 048
Voltage
Transformation
Module
Input Voltage
Designator
K
Configuration Options
F = On-board (Fig.15)
K = In-board (Fig.14)
015 T 100
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Product Grade Temperatures (°C)
Grade Storage Operating
T -40 to150 -40 to125
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K015T100 Rev. 1.2
Page 1 of 16





Páginas Total 16 Páginas
PDF Descargar[ V048F015T100.PDF ]

Enlace url


V048F015T100 Datasheet ( Hojas de datos )


Hoja de datos destacado

Número de piezaDescripciónFabricantes
V048F015T100(V048x015T100) Voltage Transformation ModuleVicor Corporation
Vicor Corporation



Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z


www.DataSheet.es    |   2017   |  Contacto  |  nuevas actualizaciones